What's more, go karts are characterized by simple structure, high safety coefficient and competitive speed, so they are extremely popular and fashionable in Europe, Japan and other countries in China. Most of the world's famous F1 riders have just started to drive go karts safely. Go kart is a very popular fitness sport. The following go kart manufacturer will introduce the methods of speeding up and converting go karts.

1、 Accelerated approach

1. Because the racing electric go kart only has the system software to keep driving, without all other redundant equipment, its acceleration is relatively simple - like ordinary cars, you just have to step on the accelerator. The throttle line will open the bypass valve and oil pipe, and the piston rod will be promoted. The load rate of the driver is the same as that of the car you touch.

2. The module of the go kart immediately drives the chain disk fixed on the rear wheel according to the transmission chain, so that the whole go kart can move forward for fitness. In this whole process, the previously mentioned weight migration situation also occurs. The rear drive go kart has a forward force, so the load on the rear tire suddenly increases. In addition, the rear tire has a greater grip, promoting the go kart to move forward without deviation.

2、 Convert to method

1. The inclination angle of a go kart will be larger than that of a normal car. In that case, the tyres that turn to the inside side will go down and the wheels on the opposite sides will move up. The left and right wheels here are moving from the top to the bottom, not vertically, so the rear tyres on the inside side will stretch out and even leave the ground. In other words, the whole go kart is driving with a three wheel grounding device when passing a curve. If you can try, if you immediately promote the go kart to turn into, that is, when all the grounding devices of the four wheels are used, you will find that the whole cart needs a lot of force before turning.

2. Because the go kart is a three wheel grounding device when turning into, it goes without saying that the total area of three wheels touching the road is less than the total area of four wheels, so the grip will be less and less. In other words, the speed must not be faster if the three wheels are always over the corner. Therefore, in theory, when the go kart enters the center of the turn, according to the actual operation of the accelerator pedal and the steering wheel of the car, it is an ideal solid model of passing the turn to maintain a safe driving of 3.5 wheels from the ground to the ground when the go kart completely escapes from the shape angle.